JAS Bravo 2.3 Vacuum Tube Single-Ended Class A Integrated Amplifier NOTE: Before installing your new Bravo 2.3 audio amplifier, please read this manual carefully. It will inform you of the product specifications and also proper installation and operation procedures. For additional requests...
Page 2
Bravo 2.3 OWNER’S MANUAL Introduction Thank you for purchasing the JAS Audio Bravo 2.3 Integrated Amplifier. Standing on the chassis immediate in front of the transformer casing are two 5AR4 rectifier tubes. On either ends of the front row are 6C33 drive stage tubes separated by two 6J4P input stage tubes in the middle.
This is to avoid any risk of shock or discomfort from high temperature. Although tube life span varies depending on the nature and degree of use, the 6C33 output tubes and the 6J4P driver tubes should last years in the Bravo 2.3 under normal home use.
Three-way taps provide output to the speaker system (4 or 8 ohm connections). Power Requirements: The Bravo 2.3 is designed to operate from the AC mains (house current) and is factory pre-set according to voltage supply of the import region. A standard IEC AC power inlet with a built-in fuse is provided on the back panel of the chassis.
Avoid abrasive cleaners! Feather dusters are good for cleaning the amplifier. Limited Warranty This product has been designed and manufactured to the highest quality and standards. However, if something does go wrong with this product, JAS Audio and its national 5 of 7 http://www.jas-audio.com...
Note: All Bravo 2.3 amplifiers have their own serial number (S/N xxxxx) marked on the back of the chassis and also printed on the exterior of the packing box.