OFR1K10 1000W Oil Filled Radiator User Manual
SAFETY GUIDE - PLEASE READ CAREFULLY
•
This appliance is not intended for use by
persons (including children) with reduced
•
Please follow all the safety precautions listed
physical, sensory or mental capabilities,
below for safety and to reduce the risk of
or lack of experience and knowledge,
injury or electrical shock.
unless they have been given supervision or
•
Read all the instructions carefully before
instruction concerning use of the appliance
using this appliance and keep them for future
by a person responsible for their safety.
reference.
•
Children should be supervised to ensure
•
Retain the manual. If you pass the product
that they do not play with the appliance.
on to a third party, make sure to include this
•
When unplugging the power cord, hold the
manual.
plug top, not the power cord.
•
Unplug the appliance from the mains supply
•
Store the appliance away from direct
when not in use, or before cleaning any part
sunlight and out of the reach of children.
of the appliance.
•
Do not cover the heater or use it to dry
•
This appliance is for household use only.
laundry or towels.
•
Do not use outdoors or in damp or wet
•
Never insert any objects into the spaces
conditions.
between the heater bars.
•
Do not immerse the appliance or the electrical
•
Do not place soft objects or fabrics over or
cord or plug in liquids.
in close proximity to the heater or otherwise
•
Do not use the appliance near a fire, oven or
obstruct the inlet or outlet.
other source of heat.
•
There are no user serviceable parts in your
•
Place the appliance on a stable and flat
appliance. Unauthorised dismantling or
surface where there is no risk of it tipping over
servicing will void the product warranty.
or being knocked over.
•
Do not operate the appliance with a
•
Ensure that there is enough space for the
damaged cord or plug or after the appliance
heater while operating. There should be at
or any component has been damaged.
least 20 cm clearance around the heater and
Send the heater to a suitably qualified or
1 m above the heater.
appointed service agent for inspection and
•
DO NOT place the appliance immediately
repair.
below an electrical socket or other appliance.
•
Do not use the appliance for any purpose
•
Do not use the heater in front of or close to an
not expressly specified in this manual.
open window. Rain may create an electrical
•
THIS APPLIANCE MUST BE ATTENDED AT ALL
hazard.
TIMES WHEN IT IS SWITCHED ON
•
Keep flammable and explosive objects away
from the heater.
SPECIAL INSTRUCTIONS
•
DO NOT hang the appliance on a wall,
This heater is filled with a precise quantity of
furniture, etc.
special oil.
•
DO NOT use the heater in the immediate
Repairs requiring opening of the oil container
surroundings of a bath, a shower or a
are only to be made by the manufacturer or
swimming pool.
an appointed service agent who should be
contacted if there is an oil leak.
•
DO NOT place the appliance close to children
or pets. Never let children operate this
Regulations concerning the disposal of oil when
appliance. Close supervision is necessary
scrapping the appliance have to be followed.
when this appliance is used near children.
OFR1K10 1000W Oil Filled Radiator User Manual
TILT SWITCH
ELECTRICAL INFORMATION
This appliance includes a tilt switch as a safety
Before using this appliance ensure that the voltage
feature. If the appliance is not placed on a flat,
of your electricity supply is the same as that
level surface, the tilt switch will switch off the
indicated on the rating plate of the appliance.
appliance.
CONTROLS AND FEATURES
1.
Handle
2.
Temperature control
3.
Power selector switches
4.
Mains lead storage
5.
Mains lead
6.
Radiator heated bars
7.
Casters
CASTER FIXINGS
Wing nut x 2
PREPARATIONS FOR USE
Remove all exterior packaging from the heater.
If you dispose of any packaging please do so
according to any recycling regulations.
FITTING THE CASTERS
The casters are mounted on a plate, each with a
fixing kit of a U-bolt and a wing nut.
CAUTION: It is essential that the casters
are fitted before using the heater to
ensure that the appliance is stable and
that adequate clearance is available for
air to flow over the radiator bars.
1.
Prepare a work surface by placing a blanket or
similar protection on a table at a convenient
working height.
2.
Lay the radiator on its side so that the base of
the radiator hangs over the table end.
3.
Slide the U-bolt through the slot between the
end two radiator bars. Position the hooked
end as shown below, ready to engage in the
hole in the caster plate.
U-bolt x 2
c
Caster plate x 2
OFR1K10 1000W Oil Filled Radiator User Manual
4.
Engage the hooked end of the U-bolt through
the caster plate.
d
e
5.
Rotate the U-bolt so that the threaded end
passes through the other hole in the caster
plate.
6.
Lock the caster plate to the radiator with a
wing nut.
f
g
7.
Fit the second caster plate in the same way.
Your heater is now ready to use. Carefully lift the
heater down to stand on the casters.
Need help?
Do you have a question about the OFR1K10 and is the answer not in the manual?
Questions and answers