Table of Contents
Advertisement
70
VHS MODE SET (cont.)
DIGITAL TBC/NR
8
ON
OFF
VIDEO STABILIZER
8
ON
OFF
Your recorder is equipped with the Digital TBC (Time Base Corrector) that removes
jitter from fluctuating video signals to deliver a stable picture even with old tapes
and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear
picture reproduction is also linked to this function.
We recommend that you set "DIGITAL TBC/NR" to "ON" when ...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the source player for editing.
NOTES:
If you play back a tape recorded under poor TV reception condition, the picture may
become more stable with Digital TBC/NR set to off.
When "DIGITAL TBC/NR" is set to "ON", if you play back a tape where certain types of
signals are recorded (using a PC or some character generators), the playback picture may
be distorted. If this is the case, set "DIGITAL TBC/NR" to "OFF".
When playing back a MESECAM tape, Digital TBC/NR does not function even though
"DIGITAL TBC/NR" is set to "ON".
When this function is set to "ON", you can automatically correct vertical vibration
in the picture when playing back unstable recordings made on another recorder.
NOTES:
When you finish viewing a tape, be sure to set this function to "OFF".
Regardless of the setting, this function has no effect during recording and during special effects
playback.
The on-screen display may jitter vertically when this function is set to "ON".
To watch recordings with close-caption, set this function to "OFF".
Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate Digital
TBC/NR when "VIDEO STABILIZER" is set to "ON", Video Stabilizer will be automatically
turned "OFF".
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
Advertisement
Table of Contents
