Instructions For Use; Removing Accessories - Hoover 5002 Hercules Instruction Manual

Instructions for Use

Before using, unwind a sufficient length of cable and insert the plug into the power socket. A yellow mark
on the power cable shows the ideal cable length. Do not extend the cable beyond the blue mark.
WARNING! Always remove the plug from the power socket before fitting or

removing accessories.

Assembling the vacuum cleaner
1. Press the ON/OFF button to turn the vacuum on.
2. To rewind the power cable, press the rewind button with one hand and guide the cable
with the other hand to ensure that it does not whip causing damage to the cable.
3. Fitting or removing the hose.
a. Insert flexible hose into the hose inlet on the front of the cleaner. Press until it clicks
into position.
b. To release the flexible hose, hold the two side clips inwards and pull from the
hose inlet.
4. Fitting the telescopic tube and accessories.
a. To fit the telescopic tube to the handle, gently insert the end of the handle into
the top of the telescopic tube.
b. To fit the floor tool to the telescopic tube, gently insert the telescopic tube
into the top of the floor tool as shown.
Telescopic tube
Floor tool