Dvr Cabling - Atlantis NetDVR V400 Quick Start Manual

1.6 DVR CABLING

Connect a video cable with BNC connectors from your monitor to the BNC video output ports on the

rear panel of your DVR .
Connect a VGA cord (not included) from your monitor to the VGA output on the rear panel of your DVR

(or use BNC Output).
Connect the USB mouse to the USB slot for mouse on the rear panel of the DVR.

Connect one end of the network cable (not included) to RJ-45 port on the rear panel of the DVR.

Connect another end of the network cable to your router, modem or other network connection device.

Plug in both of the Camera & DVR power supply to an open outlet.

44