Suzuki Maruti Manual page 77

83K
These changes are normal, the system is
designed so that the compressor turns on
or off to maintain the desired temperature.
Less operation of the compressor results in
better fuel economy.
System Operating Instructions
Natural ventilation
Select "VENTILATION" and "FRESH AIR",
the temperature selector to the desired
temperature position, and the blower speed
selector to "OFF". Fresh air will flow through
the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the blower
speed selector to a position other than "OFF".
Normal heating (using outside air)
Select "HEAT" and "FRESH AIR", the tem-
perature selector to the desired temperature
position and the blower speed selector to
the desired blower speed position. Setting
the blower speed selector to a higher blower
speed position increases heating efficiency.
Quick heating (using recirculated air)
The control settings are the same as for
normal heating except you select "RECIR-
CULATED AIR". If you use this heating
method for an extended period of time, the
air in the vehicle can become contaminated
77
and the windows can become misty.
Therefore, use this method only for quick
heating and change to the normal heating
method as soon as possible.
Cool face / Warm feet
Select "BI-LEVEL" and "FRESH AIR", the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully COLD position or fully HOT posi-
tion, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.
Normal cooling
Turn on the "A/C" switch, set the air flow
selector to "VENTILATION", the temperature
selector to the desired temperature position
and the blower speed selector to the
desired blower speed position. Setting the
blower speed selector to a higher blower
speed position increases cooling efficiency.
You can switch the air intake selector to
either "FRESH AIR" or "RECIRCULATED
AIR" as you desire. Choosing "RECIRCU-
LATED AIR" increases cooling efficiency.
Quick cooling (using recirculated air)
The control settings are the same as for
normal cooling except you select "RECIR-
CULATED AIR" and the highest blower speed.
OTHER CONTROLS AND EQUIPMENT
NOTE:
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner with
the air intake selector at "FRESH AIR"
and the blower at high speed.
Dehumidifying
Turn on the "A/C" switch, set the air flow
selector to the desired air flow selector
position, and select "FRESH AIR", the tem-
perature selector to the desired temperature
position, and the blower speed selector to
the desired blower speed position.
NOTE:
Because the air conditioner dehumidifies the
air, turning it on will help keep the windows
clear, even when blowing heated air using the
"DEMIST" or "HEAT & DEMIST" functions.
EXAMPLE
83K-05-011
7-3