Control Two Jvc Vcrs - JVC HR-VP82U Instructions Manual

A/B CODE
1 2
4 5
7 8
0

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC
VCRs independently using the A/B CODE switch. You can set
POWER
this VCR so it responds to remote commands only when the
switch is set to B, and another VCR so it responds to commands
when the switch is set to A. The switch is preset to A because
this VCR normally responds to A-code signals. You can easily
3
modify this VCR to accept B-code commands.
6
9
1
2
3
4
The VCR will now respond only to B-code commands.
UNPLUG VCR'S POWER
CORD
Unplug from the AC outlet.
SET A/B CODE SWITCH
Set the A/B CODE switch on the remote control to B.
PLUG IN POWER CORD
Plug back in to the AC outlet.
TURN VCR POWER ON
Press POWER on the remote.
49