Table of Contents
Advertisement
5 Management Software Guide
Please select a port to set settings
Port Enable:
The default is to enable the port. Check the "Disable" if you want to disconnect the port
Tx Bandwidth Control
Enable this function will restrict the given port's sending speed to the selected value.
Rx Bandwidth Control
Enable this function will restrict the give port's receiving speed to the selected value
Speed Advertised
Changing the speed and duplex mode of a given port.
Global Configuration Submenu
Global Configuration is used to configure the global port control registers. Press the Refresh button
to read the status of the registers. Press the Update button to set the registers as shown in this frame.
Qos Configuration Submenu
23
Ether-FSH2402GT Gigabit Ethernet Switch
User's Manual V1.0
Hide quick links:
Advertisement
Table of Contents
