Advertisement
Tear sponge seal off (3-5-1).Tidy up ink tube. Stick rack onto the printer cover
like (3-5-2). Make sure that tube and rack will not fall off while printing. Do not twist
ink tube (3-5-3).
Pic. 3-5-1
6. Check wire length
Move cartridge holder to the left side (3-6-1), then to the right side (3-6-2),
check if the tube is too long or too short. Move cartridge holder to right side, check if
ink tube will fall down during movement, if fall down, then the holder will be blocked
during printing. Generally, before shipment, we have adjusted the tube to the right
size, please double check before printing.
7. Adjust wire length
If step 6 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen (3-7-1) it, if too long then shorten (3-7-2).
If the tube falls down, you need adjust the angle of sticker to prevent falling.
4
INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C110/C120/D120/D130
Pic. 3-5-2
Pic. 3-6-1
Pic. 3-7-1
Pic. 3-5-3
Pic. 3-6-2
Pic.3-7-2
Advertisement
