Table of Contents
Advertisement
30
EN
1
4
7
1
ATTENTION
Movie Advance works only on prerecorded cassettes that
have been recorded in the SP mode, and have no safety tab.
If the VCR detects the EP mode after you press OK in step 4,
the following screen appears.
MOVIE ADVANCE CAN NOT
BE SELECTED FOR EP
RECORDINGS.
PRESS (SKIP) TO CANCEL
NOTES:
Normally there is a period of black and no audio at the
beginning and end of previews. The Movie Advance feature
detects those parts where the picture fades to black and the
audio fades to silence, and initiates fast-motion to skip over
the detected previews.
Some previews may not be detected and Movie Advance may
not work properly.
The setting you selected in step 3 remains in effect until the
cassette is ejected.
Patents Pending
PLAYBACK AND RECORDING FEATURES (cont.)
2
3
2
5
6
8
9
0
4
SKIP SEARCH
OK
SHUTTLE PLUS
MOVIE ADVANCE
Movie Advance
This feature helps you locate certain parts of prerecorded movies
(rented or purchased) and works in two ways.
You can go to the beginning of the movie, skipping over all
previews.
You can fast-motion the tape to the beginning of the next
preview, so you can skip over previews one by one.
LOAD A CASSETTE
1
Insert a cassette that has a prerecorded movie (rented or
purchased), with no safety tab, into the VCR. Playback
begins automatically.
ACCESS SKIP MENU
SCREEN
2
Press SKIP SEARCH.
SELECT MODE
3
Press CH 5 ∞ or SHUTTLE
PLUS % fi to move the
highlight bar (arrow) to
your choice.
a– Select "MOVIE
ADVANCE" if you want
to advance directly to
the beginning of the
movie.
b– Select "MOVIE ADVANCE (PREVIEW)" if you want
to advance to the next preview.
c– Select "SKIP SEARCH" if you do not want to perform
Movie Advance, then press OK to go back to the
normal screen. Pressing SKIP SEARCH activates the
Skip Search function (
PERFORM MOVIE
ADVANCE
a– If you selected "MOVIE ADVANCE" in step 3 and
press OK, the following screen will appear with a
blue background. The VCR will rewind the
beginning of the tape, then will fast-motion to the
beginning of the movie. "READY" will appear and
blink when the beginning of the movie is detected
and the Stop mode will be engaged. Press PLAY to
view the movie.
MOVIE ADVANCE
SRARCHING FOR BEGINNING
OF MOVIE.
PRESS (STOP) TO CANCEL
b– If you selected "MOVIE ADVANCE (PREVIEW)" in
step 3 and press OK, the VCR will fast-motion to the
beginning of the next preview and normal playback
will resume when it is detected.
Each press of SKIP SEARCH fast-motions to the
beginning of the next preview, thereby skipping over
one preview each time.
SKIP MENU
= MOVIE ADVANCE
MOVIE ADVANCE (PREVIEW)
SKIP SEARCH
PRESS (5,∞), THEN (OK)
PRESS (SKIP) TO CANCEL
pg. 25 ).
MOVIE ADVANCE
READY
PRESS (PLAY) TO START
PRESS (STOP) TO CANCEL
Advertisement
Table of Contents
