Installation - INFOSEC Eco PowerGuard TFR User Manual

INSTALLATION

1. Connect the electrical appliances to a permanently‐on or remote‐controlled outlet.
Note: The permanently‐on outlets will provide constant power. The remote‐controlled outlets
will be managed by Eco PowerGuard TFR with the On/Off mode depending on current
consumption status. Please refer to the specifications for details.
2. Connect a telephone RJ11 cable and Ethernet Cat 5 RJ45 cable to Eco PowerGuard TFR for
surge protection (cables are not provided).
3. Connect external IR remote control cable to the connector.
Note: This is an option if the user wishes to extend the IR transmission distance.
Precautions
Make sure the power source is properly grounded and use the power cord supplied with Eco
PowerGuard TFR to connect it to the power source.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
18
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 09 AA 08 204 26