Skoda Superb Owner's Manual page 253

Replacing the bulb for the fog light
Fig. 205 Front bumper: Remove the protective grille/fog light

First read and observe the introductory information and safety warn-
ings on page 247.
Removing the protective grille
›
Release the protective grille in the area of the arrow
clamp for removing the wheel trims
›
Remove the protective grille in the direction of the arrow
Changing light bulbs for fog lights
›
Use the screwdriver from the tool kit to unscrew the fog lamp
›
Remove the headlight in the direction of arrow
›
Remove the connector.
›
Turn bulb holder » Fig. 206 in an anti-clockwise direction up to the stop and
A
remove.
›
Insert the bulb holder with the new bulb into the headlight and turn in a clock-
wise direction as far as the stop.
250
Do-it-yourself
Fig. 206
Replacing the light bulb
» Fig. 205 -  using the
» page 228, Vehicle tool kit.
.
1
» Fig. 205
.
2
›
Fit the connector.
›
Replace the fog lamp by inserting it in the opposite direction of the arrow
» Fig. 205 -  and screw tight.
2
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Replacing the bulb for the licence plate light
Fig. 207 Remove the number plate light/replace the bulb

First read and observe the introductory information and safety warn-
ings on page 247.
›
Open the boot lid.
›
Insert a slotted screwdriver at the location indicated by the arrow
press it in lightly, and unlatch the springs.
›
Remove the lamp.
›
Pull the faulty bulb out of the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Replace the lamp and lightly press it until the spring latches.
CAUTION
When removing and installing the number plate light and tail light make sure that
- .
the paintwork of the vehicle and the tail light are not damaged.

» Fig. 207 - ,
» Fig. 207 - .
