Picture Control - JVC HR-VP472U Instructions Manual

20
EN
[VP672U]
[VP472U]
1
4
7
1
MENU
PLAYBACK AND RECORDING FEATURES (cont.)
2 3
2
5 6
8 9
0
4
OK
SHUTTLE PLUS

Picture Control

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5 ∞ or SHUTTLE PLUS% fi , then press OK
or SHUTTLE PLUS
SELECT PICTURE CONTROL
SET MODE
3
HR-VP672U
FUNCTION
VIDEO CALIBRATION
=PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "PICTURE CON-
TROL" by pressing CH 5 ∞ or SHUTTLE PLUS % fi ,
then press OK or SHUTTLE PLUS
desired mode.
AUTO*: Normally select AUTO.
It automatically adjust the picture quality.
* When VIDEO CALIBRATION is set to OFF
( pg. 26), you can only select NORM
instead of AUTO.
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTE:
• When you select EDIT, SHARP or SOFT, the
selected mode will not change until you select again.
• When you select EDIT to dub tapes, be sure to
select AUTO (or NORM when VIDEO CALIBRATION
is set to OFF) after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 39.
.
HR-VP472U
FUNCTION
ON VIDEO CALIBRATION
=PICTURE CONTROL
AUTO
OFF AUTO TIMER
ON SUPERIMPOSE
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
to select the
ON
AUTO
OFF
ON
OFF
OFF