Planar Bay Cat X SN-4620-1080 User Manual page 15

DVI board from the anti-static bag. (The DVI board is
shown in the pictures below.)
Use a grounding wrist
strap (not shown) or
other personal ESD
devices to prevent
damage to the board
6. Carefully slide the right side of the board into the slot
on the right side of the opening.
7. Align the connector on the board with the connector in
the opening.
Gently push the board into the connector. The board is
fully seated when the four screw holes are aligned.
8. Screw down the four corners of the DVI board with the
supplied mounting screws.
8