Skoda Superb Owner's Manual page 227

Raising the vehicle
Fig. 184 Attach lifting jack

First read and observe the introductory information and safety warn-
ings on page 222.
Position the car jack below the jacking point that is closest to the faulty
wheel » Fig. 183. The jacking point is located directly below the engraving in the
lower sill.
›
Insert the crank into the mount on the car jack
›
Position the lifting jack below the jacking point with the crank and move it up
until its claw is positioned below the vertical web of the lower sill.
›
Align the lifting jack so that its claw grasps the web
›
Support the base plate of the jack with its entire surface resting on level ground
and ensure that the lever is located in a vertical position to the area where the
claw grasps the web » Fig. 184 - .
›
Continue turning up the jack until the wheel is just about lifted off the ground.
Fig. 183
Jacking points for positioning
lifting jack
» page 222.
» Fig. 184 - .
WARNING
Only raise the vehicle at the attachment points.
■
Choose a flat and firm surface for jacking the vehicle.
■
Securing wheels against theft

First read and observe the introductory information and safety warn-
ings on page 222.
The anti-theft wheel bolts can only be removed/tightened with the aid of the
adapter » page 222, Car tool.
›
Insert the adapter » Fig. 185 with its toothed side fully into the inner tooth-
B
ing of the safety wheel bolt until the stop so that only the outer hexagon is
A
jutting out.
›
Push the wheel wrench onto the adapter
Note
Make a note of the code number hammered into the rear side of the adapter or
■
the rear side of the anti-theft wheel bolt. This number can be used to purchase a
replacement adapter from ŠKODA Original Parts if necessary.
We recommend that you always carry the adapter for the wheel bolts with you
■
in the vehicle. It should be stowed in the vehicle tool kit.
Fig. 185
Principle sketch: Anti-theft
wheel bolt with adapter
up to the stop.
B
Emergency equipment and self-help


225