JVC HR-S8850EU Instructions Manual page 51

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S8850EU:
Table of Contents

Advertisement

A
Make connections.
Connect an audio component to the AUDIO L + R input
connectors on the recorder's front panel.
When connecting a monaural audio component, use only the
recorder's AUDIO L input connector.
B
Set the recorder's input mode.
Press AUX (number key "0") and/or PR to select "F-1" or
"S-1".
C
Locate the start point.
4
Press
to start playback of the tape in your recorder, and
9
press
when you reach the point where you want to start
dubbing.
D
Engage the Audio Dubbing mode.
Press A.DUB.
Your recorder enters the Audio Dubbing Pause mode. ("
u
i
blinks, "
" and "
" light up on the front display panel.)
To perform Audio Dubbing with audio mixing, press AUDIO
a
s
to select "
+
(L+R)" at this point.
* Audio Dubbing with audio mixing is not possible if you are using a
monaural audio component, or if you don't have an audio mixer.
E
Start dubbing.
Engage the audio component's Play mode, then press
to start the tape in your recorder; Audio Dubbing begins
at this point.
o
"
" blinks and "
To stop dubbing temporarily, press
dubbing.
F
End Audio Dubbing.
8
Press
on the remote control or
stop the tape in your recorder, and engage the audio
component's Stop mode.
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO to select "
Audio Dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
o
"
Audio Dubbing is also possible using the rear panel AV1 (L-1)
IN/OUT or AV2 (L-2) IN/DECODER connector. When using
these 21-pin SCART connectors, be sure to select the correct
input mode ("L-1" or "L-2") in step 2.
Audio Dubbing is not possible with cassettes whose record
safety tab has been removed.
When playing back an audio-dubbed tape, press AUDIO to
select the soundtrack you wish to hear. (
u
" is displayed on the front display panel.
9
. Press
0
on the recorder to
a
s
+
(L+R) + NORM" (
51
EN
4
4
to resume
pg. 23).
pg. 23)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents