Automatic Satellite Programme Recording - JVC HR-S8700EK Instructions Manual

40
Automatic Satellite
Programme Recording
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver;
the recorder starts recording when the signals input from the satellite receiver to the AV2 (L-2) IN/DECODER connector, and when
there is no input signals the recorder stops recording and the power shuts off.
Outdoor Unit
Satellite Receiver Unit
Mains outlet
S OUT
Back of Recorder
IMPORTANT
When you set "L-2 SELECT" to "SAT" (
the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the
VCR indicator on the display panel.
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video
mode.
NOTE:
Refer to the instructions supplied with your satellite receiver.
Satellite Cable
OUT
S
IN/OUT
SORTIE
ENTREE/SORTIE
AUDIO
AV1 (L-1)
OUT
IN/DECODER
SORTIE
ENTREE/DECODEUR
AV2 (L-2)
PAUSE
TELEC.
pg. 50), it is possible to view a satellite broadcast with the TV set to its AV mode even if
ADVANCED OPERATIONS (cont.)
Aerial
TV Aerial cable
ANT. IN
RF OUT
ANT. IN
SYNCHRO EDIT ANTENNE
ENTREE
MONTAGE SYNCHRO
JLIP
SAT CONTROL
CONTROLEUR SAT
RF OUT
ANTENNE
SORTIE
Back of TV
S-VIDEO IN
connector
Aerial
connector
AUDIO IN
connector
21-pin AV input
connector (SCART)