Airties Documentation; Manual Overview; Safety And Maintenance; Airties Network Assistant - AirTies Air5452 User Manual

AirTies Documentation

This manual has been prepared by AirTies Wireless Networks
Corporation. All rights reserved.

Manual Overview

This manual guides you through the steps necessary for setting up
and configuring your AirTies device. Please read this manual
carefully before beginning the installation process.
The Warranty does not cover failure or damage as a result of not
following the instructions in the manual. AirTies will not be held
responsible in such circumstances.
The User Manual is an important resource you can refer to for safe
and proper use of your device. Please retain it for future reference.

Safety and Maintenance

• In order to prevent damage to your device, be sure to keep it in
its original box during transportation.
• The device must be used solely with its original power adapter.
Please note that the adapter is 220V only. Do not use with
110V AC.
• Do not insert a PSTN (phone) plug into the LAN port.
• If you encounter any problems, do not open or disassemble the
device. Call AirTies Technical Support.
• In order to prevent electric shock, do not operate the device in
wet or damp areas.
• In the event of a gas leak, do not use the device. Do not turn
the device on or off. Do not plug or unplug the power cord.
• Avoid using the device in dusty environments. If dust buildup
should occur, use a dry cloth to remove the dust.
• To clean the exterior of the device use a dry cloth. Do not
attempt to clean the interior. There are no user serviceable
components inside.
• For information regarding the installation and configuration of
the device consult the remainder of this manual.

AirTies Network Assistant

AirTies Network Assistant is an application that will setup and
configure, monitor and manage home networks. It has been
specifically designed to enable non technical users to perform tasks
that are important to effectively managing the home network. Your
AirTies product will be provided with a CD that contains the AirTies
Network Assistant application. Alternatively you can download the
latest version from www.airties.com. AirTies Network Assistant can
be installed on as many PCs as you would like and can also be used
to monitor networks that do not contain AirTies devices, although
many key features will be missing because they require AirTies
devices.

Minimum System Requirements

Any of Windows XP SP2 or greater, Windows Vista and Windows 7
operating systems installed on the PC. AirTies Network Assistant
runs when Windows starts up and continues to monitor the network
for any changes or problems. If problems are discovered then
troubleshooting will fix the problems.

Installation

During AirTies Network Assistant installation your AirTies device will
be setup and configured. Insert the CD that came with your AirTies
device into the CD ROM drive of your PC, after a few seconds the
animation will run. Select the product category and product that you
want to configure from the menu. After selecting your product's
name an animation shows your box contents. Ensure that the box