Related Manuals for AirTies Air 5450
Summary of Contents for AirTies Air 5450
- Page 1 300 Mbps Wireless ADSL2+ Router User manual Поддержка 7/24 CD простой установки 8 800 100 02 80 Air 5450 8 800 507 44 40...
-
Page 2: Table Of Contents
Wireless Security Settings 4.3.1 WPA2 Security Settings TECHNICAL PROPERTIES 4.3.2 WPA Security Settings PHYSICAL CHARACTERISTICS 4.3.3 WEP Security Settings MAC Filtering AirTies Mesh settings ADVANCED SETTINGS HOMEPAGE 5.2.1 IP and DHCP Settings 5.2.2 LAN Clients FIREWALL settings 5.3.1 Access control 5.3.2... - Page 3 The Warranty does not cover failure or damage as a result of not following the ins- tructions in the manual. AirTies will not be held responsible in such circumstances. The User Manual is an important resource you can refer to for safe and proper use of your device.
-
Page 4: Introduction
With Air 5450 which uses 802.11n technology, transfer wireless data, watch videos Front Panel INTRODUCTION or upload your pictures to the Internet at speeds of up to 300Mbps. Backward compatible with the wireless 802.11b/g devices, the Air 5450 provides 6 times faster wireless communications compared to earlier technologies. -
Page 5: Back Panel
Easy installation with animated instructions with the Easy Setup CD • Automatic Firmware Upgrade: Automatic firmware upgrade capability with the AirTies ADSL Utility. It is important to use the latest firmware to get the best possible performance out of your router. •... -
Page 6: Installation
ADSL service provider in the “ADSL Username” and “ADSL Password” 2- Turn on the Air 5450 by setting the On/Off switch to the “|” position. fields, respectively. Click “Save” to complete your ADSL setup. -
Page 7: Dns Setup
DNS (Domain Name Service) is an Internet service that translates domain names up to 300Mbps allowing you to share files between PCs at very high speeds. Your into IP addresses. For example, when you try to go to the www.airties.com address, SETTINGS router is backward compatible with the 802.11b/g standards and can also work... -
Page 8: Wireless Network Settings
WPA2, WPA, and WEP are wireless encryption protocols used to encrypt the data traffic within the wireless network. MAC Address Filtering allows you to control which wireless terminals can connect to the AirTies router and share your Internet access. Access to the router by unauthorized terminals is blocked. - Page 9 WEP Security WPA (Wi-Fi Protected Access) encryption standard is one of the current wireless Your AirTies router supports WEP encryption in addition to the WPA and WPA2 encryption standards that provide a high level of data protection. All AirTies encryption standards. If any of the devices in your wireless network does not...
-
Page 10: Mac Filtering
AirTies wireless access point devices functioning in repeater mode are connected to your device to set up a “Mesh Network”. The wireless access points communicate with each other via the Mesh protocol and boost the signal wherever signal strength is low thus increasing wireless range. -
Page 11: Advanced Settings
Mesh connection with. Select only those access points that have a signal level of “Average” or better. Click “Save” to complete the Mesh settings of your device. 5. The same Mesh settings should be made on all the AirTies access points selected above. You can find detailed information about Mesh settings for each type of access point device in their user manuals. -
Page 12: Homepage
Any device that you connect to your router, such as PCs, network printers, IP cameras, etc., is a client. Any operation related to clients that will have a local network connection to your router can be done through the “LAN” menu of the Web interface and its submenus. -
Page 13: Lan Clients
DHCP Settings Disable DHCP This section is for DHCP related settings. The settings you can change are the Stops all DHCP activity on the device. When in this mode, clients connected to following: the router need to be assigned an IP address manually or they have to get an IP address from another DHCP server in order to communicate with the network. -
Page 14: Access Control
AirTies Firewall has SPI (Stateful Packet Inspection) feature. SPI monitors the pro- o Enter a name for the application you are going to define in the “Application tocol and packet addresses being received to determine if the information should Name”... -
Page 15: Mac Address Filtering
5.3.2 MAC address MAC Address Filtering allows you to restrict network access based on MAC addres- ses. When this feature is activated, the clients whose MAC addresses are on the list filtering will have their access to the router blocked. To restrict access based on MAC Address: •... -
Page 16: Port Forwarding
Network Address Translation (NAT) is a way to map an entire network (or networks) to a single IP address. NAT allows multiple clients in your local network to access the Internet through a single global IP address (WAN IP) assigned to you by your Internet service provider. -
Page 17: Dmz
5.5.1 After you click “Save”, the following “Port Forwarding” screen will come up. Here, Static Routing To define a static routing rule, go to “Static Routing” under the “ROUTING” menu of you will see the port forwarding rule you have defined. After checking that all the the Web interface. -
Page 18: Management
MANAGEMENT The “MANAGEMENT” menu of your router’s Web interface lets you configure local 5.6.2 Remote To enter the settings related to the remote management of your device, go to and remote management settings “Remote Management” under the “MANAGEMENT” menu. Management To enable remote management of your device, click the “Enable Remote Management”... -
Page 19: Remote Management
If “Any IP” is not checked, you have to add the WAN IP address of the computer from which you would like to remotely manage your device to the “IP Access List”. To do this, enter the WAN IP address in the “New IP Address” field and click the “Add”... -
Page 20: Ddns
Clicking “Save” will take you to the “DDNS Settings” screen again. Here you can see DDNS Dynamic DNS (DDNS), ensures that your hostname and IP address in the Internet the account information you have entered and account status, and if you have more name servers are always current. -
Page 21: Firmware Upgrade
System Logs The “System Logs” under the “REPORTS” menu displays detailed system logs the most recent firmware file from the AirTies website www.airties.com). Then click about system activity and the applcations that were active since the router was last “Upgrade”. -
Page 22: 6 Technical Properties
TECHNICAL • ADSL properties: G.992.1 Annex A (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL2), G992.4 (G.Lite.bis), G.992.5 (ADSL2+),Rate Adaptive DSL (RADSL), READSL, PROPERTIES Traffic shaping UBR/CBR, OAM (I.610) • Connection protocols: PPPoE, PPPoA, RFC1483 Bridging, RFC1483 Routing, classical IP over ATM, PAP/CHAP, RFC 2364 PPP over AAL5, RFC2366 Multicast over ATM •... - Page 23 Поддержка 7/24 CD простой установки Гарантия 3 года 8 800 100 02 80 8 800 507 44 40 Гарантия 3 года Поддержка 7/24 ки Гарантия 3 года 8 800 100 02 80 8 800 507 44 40...