Stereo And Sap (Second Audio Program); To Record Sap Programs - JVC HR-S7500U Instructions Manual

POWER MENU
OK
1 2
4 5
7 8
0
1
MENU
– +
JOG
SHUTTLE
3
2
6
9
4
OK
TIME SCAN
Stereo And SAP
(Second Audio Program)
Your VCR's built-in MTS decoder enables reception of Multi-
channel TV Sound broadcasts.
When the channel is changed on the VCR ...
The "STEREO" indication appears on the screen for about 5
seconds if the program is a stereo broadcast.
The "SAP" indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
Both indications appear when a stereo program is
accompanied by SAP audio.
To Record Stereo Programs . . .
. . . simply follow the basic recording procedure.
To Listen To Stereo Soundtrack During Recording . . .
. . . set "AUDIO MONITOR" to "HI-FI" at the Function screen
( pg. 29).

To Record SAP Programs . . .

ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or TIME SCAN % fi, then press OK or
#
TIME SCAN .
SELECT 2ND AUDIO
RECORD SET MODE
3
Move the highlight bar
(arrow) to "2ND AUDIO
RECORD" by pressing
CH 5 ∞ or TIME SCAN
% fi, then press OK or
#
TIME SCAN to set to
"ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If a SAP program is received and "2ND AUDIO RECORD" is
set to "ON", the SAP audio is recorded on both the Normal
and Hi-Fi tracks. The main audio program is not recorded.
If a non-SAP program is received, the main audio is recorded
on both the Hi-Fi and Normal audio tracks.
43
EN
FUNCTION
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER
OFF
DIGITAL R3 ON
VIDEO STABILIZER OFF
=2ND AUDIO RECORD
OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END