Index Search; Manual Index Mark/Erase - JVC HR-S7300U Instructions Manual

+
–
1 2 3
4 5 6
7 8 9
0
REW

Index Search

This function seeks out index codes that are placed on the tape
at recording start.
START SEARCH
1
While the tape is stopped, press SEARCH T or Y.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
SEARCH T or Y repeatedly until the correct
number is displayed on screen (only if SUPERIMPOSE
is set to ON (
when the desired recording is located.
To find the very beginning of the desired program,
press REW or FF and search visually for the start point.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.

Manual Index Mark/Erase

To mark an index code...
...during playback press INDEX MARK on the VCR.
The VCR will mark an index code at that location.
If "SUPERIMPOSE" is set to ON (
the screen while an index code is being marked.
To erase an index code...
...during playback or still press INDEX ERASE on the VCR.
The VCR will fast-forward to the nearest index code and erase
it. Playback continues after the index code is erased.
FF
If "SUPERIMPOSE" is set to ON (
the screen while an index code is being erased.
pg. 30). Playback begins automatically
pg. 30), "MARK" blinks on
pg. 30), "ERASE" blinks on
31