Appendix C - Ade/Bde Cable - Iridium Pilot Installation Manual

Appendix C – ADE/BDE Cable
ADE/BDE Interface Cable Drawing
Notes:
1. BDE connector to be RJ-45 shielded, connected as per table. Use Stewart Connector Part number
943-SP-370808SM2 or equivalent.
2. The ADE connector is Bulgin Buccaneer PX0728/S connected per the table below. To maintain weather proof
seal the connector gland nut must be tightened to 10 lbf-inches of torque.
3. Cable to be exterior grade foil shield Category 5 (or better) to IEC 332-1, such as Beldon part number
7919A or equivalent.
4. Cable length is typically 45 meters long. The combined length of the ADE/BDE interface cable plus the
Computer-to-Data port cable shall not exceed 100 meters total length to comply with Ethernet maximum
length standards.
5. If installer is not using Iridium provided cables and is creating a cable, please follow the pin out instructions
as detailed below.
ADE Connector
I
2
3
4
5
6
7
8
9
www.busse-yachtshop.de | info@busse-yachtshop.de
Conductor Color
Standard (T568A)
White/Orange stripe
Orange solid
Brown solid
(drain wire)
White/Brown stripe
Green solid
White/Green stripe
Blue solid
White/Blue stripe
BDE Connector
3
6
8
SHIELD
7
2
1
4
5
Iridium Pilot™ Installation Guide
39