Display Panel - JVC HR-S6600EK Instructions Manual

DISPLAY PANEL

1
VPS/PDC
9
1 B.E.S.T. Picture System Display lights from
bottom to top while B.E.S.T. is active.
2 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SEARCH:
3 Tape Speed Indicators display mode of record-
ing; light during Record or Play mode.
* EP is only for NTSC playback.
4 Programme Time Indicators show the
programme start time ( ) and the programme
stop time ( ) for timer-recording.
5 "Timer" Indicator lights when
pressed to engage Timer mode.
6 Tape Remaining Time Indicator displays time
remaining on tape when certain buttons are
pressed. pg. 15
7 Channel Display shows preset position where
the station currently being received is stored.
Clock Display shows current time.
8 Instant REVIEW Indicator blinks after timer-
recording and shows how many programmes
have been timer-recorded.
2 3 4
SP
VCR
0
!
pg. 22
STILL:
SLOW:
RECORD:
RECORD PAUSE:
pg. 14
pg. 16
has been
pg. 17, 19
pg. 10
pg. 25
5 6 7
@
9 PDC Indicator lights when PDC has been
engaged for timer recording.
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
0 S-VHS Indicator lights when a cassette marked
S-VHS is inserted with S-VHS mode set to
"AUTO", and when an S-VHS recorded tape is
played back.
! VCR Indicator lights when the video recorder is
in the video mode. At this point, the TV auto-
matically enters AV mode.
@ "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
# Counter shows time elapsed since playback or
recording began.
With
from current tape position to end of tape
( pg. 15).
Counter, Preset Position*, Clock and Tape
Remaining Time Display appear alternately
when – –:– – is pressed.
* Preset Position is not displayed during playback.
$ Mode shows external input mode selected (L-1,
L-2 or S-1).
8
REVIEW
#
$
pg. 21
pg. 12
displayed, shows time remaining
55
pg. 17, 19