Power Windows
1.
Closing
2.
Interrupting
3.
Opening
When locking doors or trunk, turn key
in door lock or trunk lock to position 3
and hold. The windows begin to close
automatically after approximately 1
second.
To interrupt the closing procedure, turn
key to position 2.
When unlocking doors or trunk, turn
key in door lock or trunk lock to
position 1 and hold. The windows
begin to open automatically after
approximately 1 second.
To interrupt the opening procedure,
turn key to position 2.
Warning!
Never operate the windows if there
is the possibility of anyone being
harmed by the procedure.
In case the procedure causes
potential danger, the procedure can
be immediately reversed by turning
the key to the reversed operational
direction within 10 seconds:
• for opening position (1)
• for closing position (3).
Note:
If the opening/closing procedure is
interrupted, it can only be continued
by first turning the key to the
interrupting position (2) and then again
to the opening/ closing position
(1 or 3) and hold.
34