SoftBank 911SH Instruction Manual page 138

7
Enter/edit items as needed
^ Select an item and press b. Complete selection/entry and
press b.
Channel:
TV station:
Program:
6
Record TV Data:
Repeat:
^ In addition, edit set date/time in Start Date & Time: or End
Date & Time: or change timer type in Program Type:.
8 Press M q
The entry is saved.
^ When memory is low, confirmation appears. Press b to save.
Timer Recording Precautions
^ End the current operations.
^ Adjust Antenna angle for better TV reception.
^ Make sure battery is adequately charged. (Charge battery
while recording.)
^ Make sure there is enough free space on Memory Card.
C If one of these messages appears, entry is not saved.
Check start date/time, end date/time or channel.
B Invalid starting or ending date/time! Cannot save.
B Cannot save. Confirm End Time.
B Reservation Times overlapping!
B The maximum recording time is 4 hours.
6-20
Select a channel
Enter/edit station name
Enter program name
Select Image + Text or Image Only
Select Once Only, Every Day or
Selected Days
Error Messages
Warning Messages
C If one of these messages appears, recording may fail or be
incomplete:
B Starting time passed already. Will be recorded from
the middle.
B Reservation Times partly overlapping!
B No Memory Card. Reservation is saved correctly.
B Low on free space! Please insert another memory
card.
B Please charge the battery before recording.
B Recording may stop due to temperature raised by
long time recording.
Timer Recording Time
C Digital TV reception is slightly delayed on handset.
Therefore, portions aired immediately before the timer start
time may be included in recordings.
^ Recording ends a few seconds after the timer end time.
C Timer entries set via EPG are updated automatically when
EPG data is updated due to program time changes.
^ Timer entries may not be updated automatically.
^ Timers are cancelled when target programs are cancelled.
H
Tip To set timers via program schedule, see P.6-10 "Program
Information".