Advertisement
BATTERIES:
The battery pack is equipped with Lithium-
Ion rechargeable batteries. The duration of
use from each charge will depend on the
type of work performed.
The batteries in this tool have been designed
to provide maximum trouble-free life. Like all
batteries, they will eventually wear out. Do
not disassemble the battery pack or attempt
to replace the batteries. Handling of the
batteries, especially when wearing rings and
jewelry, could result in a serious burn.
To obtain the longest possible battery life,
read and understand the operator's manual.
It is good practice to unplug the Charger/
Adapter and remove the Lithium-Ion
battery pack when not in use.
For Lithium-Ion battery pack storage longer
than 30 days:
Store the Lithium-Ion battery pack where
the temperature is below 80°F (26°C) and
free of moisture.
Store Lithium-Ion battery packs in a
30%-50% charged condition.
Every six months of storage, fully charge
the Lithium-Ion battery pack.
Exterior may be cleaned with a cloth or
soft non-metallic brush.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve natural
resources, please
recycle or dispose
of batteries properly.
This product contains
lithium-ion batteries.
Local, state, or federal
laws may prohibit disposal of lithium-
ion batteries in ordinary trash. Consult
your local waste authority for information
regarding available recycling and/or
disposal options.
page 14
WARNING:
the battery pack for disposal or recycling,
cover the battery pack's terminals
with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery
pack or remove any of its components.
Lithium-Ion batteries must be recycled or
disposed of properly. Also, never touch
both terminals with metal objects and/
or body parts as short circuit may result.
Keep away from children. Failure to
comply with these warnings could result
in fire and/or serious injury.
TROUBLESHOOTING
Problem
Cause
Battery is
depleted
The machine
The auto
is too hot after
hammer
continuous use
does not
work
Battery is
too hot after
continuous use
WARNING:
switch to the "OFF" position and remove
the battery from the power tool before
performing troubleshooting procedures.
Upon removal of
Solution
Charge the
battery
Cool down the
machine
Allow the
battery to cool
or replace it
with a cool
battery
Turn the trigger
Advertisement
