JVC HR-S4500U Instructions Manual page 53

RETURN TO NORMAL SCREEN
7
Press MENU.
ACCESS MAIN MENU SCREEN
8
Press MENU.
ACCESS FUNCTION SET SCREEN
9
Press CH 5 ∞ or TIME SCAN % fi to move the highlight
bar (arrow) to "FUNCTION SET", then press OK or TIME
#
SCAN .
ENABLE REMOTE PAUSE
FUNCTION
10
Press CH 5 ∞ or TIME
SCAN % fi to move the
highlight bar (arrow) to
"AV COMPU-LINK", then
press OK or TIME SCAN
to set to "OFF".
The REMOTE PAUSE/AV
COMPU-LINK connec-
tor works as the AV
Compulink Playback
connector when "AV
COMPU-LINK" is set to
"ON" ( pg. 31), and
works as the Remote
Pause connector when
"AV COMPU-LINK" is
set to "OFF".
RETURN TO NORMAL SCREEN
11
Press MENU.
ACCESS MAIN MENU SCREEN
12
Press MENU.
ACCESS FUNCTION SET SCREEN
13
Press CH 5 ∞ or TIME SCAN % fi to move the highlight
bar (arrow) to "FUNCTION SET", then press OK or TIME
#
SCAN .
FUNCTION
= AUTO TIMER
OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER OFF
#
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
S-VHS MODE AUTO
= AV COMPU-LINK
OFF
VIDEO CALIBRATION ON
TIMESCAN AUDIO ON
REAR AUX INPUT VIDEO
TAPE DUB MODE ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
SELECT TAPE DUB MODE
14
Move the highlight bar
(arrow) to "TAPE DUB
MODE" by pressing CH
5 ∞ or TIME SCAN % fi,
then press OK or TIME
#
SCAN to set to "ON".
RETURN TO NORMAL SCREEN
15
Press MENU.
START PLAYER
16
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
17
Set your VCR to its record mode.
If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
NOTES:
Be sure to set "TAPE DUB MODE" back to "OFF" when you
finish editing.
When "TAPE DUB MODE" is set to "ON" Active Video
Calibration is deactivated in order to provide better picture
quality edits.
If you use an auxiliary input to connect a cable box or DBS
receiver make sure that the correct input ("L-1", "F-1" or
"S-VIDEO") is selected after you have finished editing (
3, 6, pg. 52).
53
EN
FUNCTION
= AUTO TIMER
OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER
OFF
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
S-VHS MODE AUTO
AV COMPU-LINK ON
VIDEO CALIBRATION ON
TIMESCAN AUDIO ON
REAR AUX INPUT VIDEO
= TAPE DUB MODE
ON
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
step