Motorola StarTAC 3000 User Manual page 81

Changing the System Mode
Standard Mode:
Your phone first seeks a home type system,
then a non-home type system.
If home system is non-wireline (type A)
If home system is wireline (type B)
Reversed Preference Mode:
Your phone first seeks a non-home type
system, then a home type system. (This
mode may be useful in fringe areas or
certain roaming situations.)
If home system is non-wireline (type A)
If home system is wireline (type B)
Home Only Mode:
Phone will not operate outside its home
system.
Scan A Mode:
Phone will operate only within non-wireline
(type A) systems.
Scan B Mode:
Phone will operate only within wireline
(type B) systems.
Preferred System ID Mode:
Phone will scan for home or programmed
preferred SIDs first. This choice requires
entry of up to 60 System ID numbers for
those systems in which you wish to operate.
Contact your Cellular Service Provider for
SID information.
System
Mode
Settings
Std Ab
Std bA
SCAnbA
SCAnAb
HoM<E
SCAn A
SCAn b
P SCAn
81