Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Traxis DBS-2800
Summary of Contents for Traxis DBS-2800
- Page 1 Digital Satellite Receiver Headend Equipment DBS-2800 http://www.traxis.co.uk...
-
Page 2: Table Of Contents
2. Check Points before Use 2.1 Accessories....................2 3. Description & Installation 3.1 Front panel....................3 3.2 Rear panel....................4 4. System connection..................5 5. Main Menu 5.1 TV Channel....................6 5.2 Radio Channel...................9 5.3 Installation....................10 5.4 OSD......................22 5.5 About DVB....................23 6. ENTER......................24 7. Technical specification................25 http://www.traxis.co.uk... -
Page 3: Safety/Precaution
When the unit is suddenly mov ed to a hot area from a cold area, it may cause prob- lems by dew forming. In that case, turn off the power, and after one or two hours turn on the power. http://www.traxis.co.uk... -
Page 4: Check Points Before Use
Check Points before Use 2.1 Accessories User’s manual: 1 Cable: 1 http://www.traxis.co.uk... -
Page 5: Description&Installation
Display (4-Digit/7-Segment): Indicates oper ating status of the r eceiv er. CHANNEL ¡ø / q: To change channels, or to move cur sor in the menu. EN TER: To select an item in the menu and confirm it. VOLU ME / : To adjust the volume level. http://www.traxis.co.uk... -
Page 6: Rear Panel
3.2 Rear panel SATELLITE OUT: IF input from LNB to digital tuner. SATELLITE IN: IF output from LNB to other digital tuner. AUDIO R/L VID EO RS-232: Serial port to upgrade softw are. AC POWER OUT PUT. AC POWER INPUT. http://www.traxis.co.uk... -
Page 7: System Connection
System Connection System Connection The following figure shows cable connections required for satellite LNB, TV and etc. as may, different equipment configurations ar e possible. If you need any assistance for specific equipment connection, please contact your local distributor. http://www.traxis.co.uk... -
Page 8: Main Menu
The channel will be deleted when y ou ex it fr om the menu in the Notes menu. ¢Ú Audio Select <Audio> with VOLU ME On the front panel. Select a channel you want to Audio with CHANNEL ¡ø / q, and press ENTER, you will see the sub-menu as shown in the following figure. http://www.traxis.co.uk... - Page 9 ENTER , you can move it to the new position. Press MENU to return to the previous menu. ¢Ü Edit Select <Edit> with VOLU ME On the front panel. Select a channel you want to edit with CHANNEL ¡ø / q, and press ENTER, you http://www.traxis.co.uk...
- Page 10 Select a channel you want to rename with CHANNEL ¡ø / q, and press ENTER, you will see the sub-menu as shown in the following f i gure. Pr ess CHANNEL ¡ø / q or VOLUME and press ENTER to confirm it. Pr ess MEN U to r eturn to the previous menu. http://www.traxis.co.uk...
-
Page 11: Radio Channel
Select <Radio Channel> in main menu with CHANNEL ¡ø / q, and press ENTER, you will see the sub- menu as shown in the following figure. you will see the sub- menu as shown in the following figure. The oper ation for the R adio Channel is the same as TV Channel. http://www.traxis.co.uk... -
Page 12: Installation
Univ ersal In case y ou are using universal LNB, select<On>with VOL / , LN B (low) and LNB (high) will display default (9750MHz and 10600MHz). To change LNB fr equency, when univer sal select <Off> with VOL / http://www.traxis.co.uk... - Page 13 ¢Û Rename Select <Rename> with VOLUME On the front panel. Select a satellite you want to Rename with CHANNEL ¡ø / q , and press ENTER, you will see the sub-menu as shown in the following f i gure. http://www.traxis.co.uk...
- Page 14 Select a satellite with CHANNEL ¡ø / q, and press ENTER, you will see the sub- menu as shown in the following figure. Duri n g searchi n g, you can press ENTER to skip the t r ansponder, press MENU to exit t h e menu. http://www.traxis.co.uk...
- Page 15 On the front panel, and press ENTER, the screen w ill display: Input frequency,symbol rate, polarization and FTA ON LY with CHANNEL ¡ø / q or VOLUME On the front panel. Pr ess ENTER , then add a TP, else cancel operation. http://www.traxis.co.uk...
- Page 16 ¢Û Select <D elete> with VOLU ME On the front panel. Select a TP you w ant to delete with CHANNEL ¡ø / q , and press ENTER, you will see the sub-menu as shown in the following figure. http://www.traxis.co.uk...
- Page 17 , press ENTER, then delete the TP, else cancel oper ation. ¢Ü Select <1T P> with VOLUME Press ENTER to start channel searching, you will see the sub- menu as shown in the following figure. When channel sear ching is done, press MEN U to exit. http://www.traxis.co.uk...
- Page 18 When satellite searching is done, press MENU to exit. ¢Þ Select <PID> with VOLUME Select a TP you want with CHANNEL ¡ø / q . Press ENTER, you will see the sub- menu as shown in the following figure. http://www.traxis.co.uk...
- Page 19 Signal Select <Signal> with VOLUME Press ENTER to check signal strength of the TP you have chosen, you will see the sub-menu as shown in the following figure. Pr ess MEN U to return to the prev ious menu. http://www.traxis.co.uk...
- Page 20 TV Screen Format Select your TV aspect ratio 4:3 or 16:9 w ith VOLUME ¢Û LNB Power With VOLUME select ON/OFF. ¢Ü FTA Only FTA Only <Yes>: Search only fr ee to air channels. FTA Only <No>: Search all channels. http://www.traxis.co.uk...
- Page 21 Update software (computer to receiver with television) ¢Ù Connect your PC and receiver with RS-232C cable. Turn on the receiver select <Update software> in <Installation>, press ENTER, y ou ¢Ú w ill see the sub-menu as show n in the following figure. http://www.traxis.co.uk...
- Page 22 Select <Factory Default> with CHANNEL ¡ø / q, and press ENTER, you will see the sub-menu as shown in the follow ing figure. Select <Yes> with VOLU ME , you will see the sub-menu as shown in the following figur e. http://www.traxis.co.uk...
- Page 23 Select <Yes>, All channel data and settings will be lost. Notes: If your operation is wrong or system has no respondence, please power off receiver, and restart it. make your receiver restored system default (operate “Reset System”), then pow er off r eceiver and restart it again. http://www.traxis.co.uk...
-
Page 24: Osd
¢Ù Language English, D eutsch, France, Spanish, Portuguese, Italian. ¢Ú Menu Color Select your favorite color of OSD with VOLUME ¢Û Tr ansparency Select the transparency of OSD betw een 1 and 11 with VOLU ME http://www.traxis.co.uk... -
Page 25: About Dvb
To check the version of your receiver’s hardw are and software, select <About DVB> in main menu with CHANNEL ¡ø / q, and press ENTER, you will see the sub-menu as shown in the following figur e. Press MEN U to return to the previous menu. http://www.traxis.co.uk... -
Page 26: Enter
ENTER ENTER Exit all menus, Press ENTER On the front panel, you will see the sub-menu as shown in the follow ing figure. Select TV with CHANNEL ¡ø / q , Press MEN U to return. http://www.traxis.co.uk... -
Page 27: Technical Specification
Demodulation SCPC/MCPC Sy mbol rate RS (204, 188, 8) Outer code ALL DVB rates Inner code DVB-S recommendation Energy dispersion INPUT SIGNAL 950MH z~2150MHz Frequency -65dBm ~ -25dBm Input lev el 36MHz Channel bandwidth F- type connector Input socked http://www.traxis.co.uk... - Page 28 9 Pin D-sub Type Connector Rs232 Asynchronous Pr otocol Max 57.6 Kbps Data Rate MISCELLANEOUS 85~260VAC 50~60Hz Supply voltage 21 watts max Power consumption +5¡æ to +40¡æ Operation temper ature -20¡æ to +70¡æ Storage temperature 480x245x41 mm Dimension( WxDx H) 3.2Kg Weight http://www.traxis.co.uk...
Need help?
Do you have a question about the DBS-2800 and is the answer not in the manual?
Questions and answers