Display | 3D - Optoma HD26 Manual

User Controls

DISPLAY | 3D

3D Format is only

supported.on.3D.
Timing on page
3.
"3D Format" is

only supported on
non-HDMI..4a.3D.
timing.
40
English
3D.Mode
Off: Select "Off" to turn off 3D mode.

DLP-Link: Select "DLP-Link" to use optimized settings for DLP

Link 3D Glasses. (refer to page 16).
VESA 3D: Select "VESA 3D" to use optimized setting for VESA

3D Glasses. (refer.to.page.)..
3D Format
Auto: When a 3D identifi cation signal is detected, the 3D for-

mat is selected automatically.
SBS: Display 3D signal in "Side-by-Side" format.

Top and Bottom: Display 3D signal in "Top and Bottom" format.

Frame Sequential: Display 3D signal in "Frame Sequential"

format.
3D -> 2D
3D: Display 3D signal.

L (Left): Display the left frame of 3D content.

R (Right): Display the right frame of 3D content.

3D Sync. Invert
Press the "On" to invert left and right frame contents.

Press the "Off" for default frame contents.

DISPLAY
3D
3D.Mode
3D Format
3D -> 2D
3D Sync. Invert
Off.
Auto
3D
Off
.. ..Exit