To Set The Remote Unit (Ru) - PI Manufacturing 6900 Series Installation And Operation Manual

Step 10. Please key-in the number of Remote unit (RU) to the column of AP MAC Address.
If you don't know the values, please look for the 3.3 (set the RU), to run step 8, then to
search the number.
Step 11. To choose 802.11g of Mode column.
Step 12 To change the values of channel to 11.

3.3 To set the Remote unit (RU)

PC Configuration
Follow the steps below in order to configure the TCP/IP settings of your PC.
Step 1. In the Control Panel double click Network Connections, and then double click on the
connection of your Network Interface Card (NIC). You will then see the following screen.
18