Nom Information (Mexico Only); Technical Specifications - Dell PowerVault MD3200i Getting Started

Storage arrays
Hide thumbs Also See for PowerVault MD3200i:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

NOM Information (Mexico Only)

The following information is provided on the device described
in this document in compliance with the requirements of the
official Mexican standards (NOM):
Importer:
Model number:
Supply voltage:
Frequency:
Current consumption:

Technical Specifications

Drives
PowerVault MD3200i
PowerVault MD3220i
RAID Controller Modules
RAID controller modules
Back-Panel Connectors (Per RAID Controller Module)
iSCSI connectors
SAS expansion connector
Serial connector
16
Getting Started With Your System
E03J and E04J
100–240 V CA
50/60 Hz
8.6 A
Up to twelve 3.5-inch SAS hot-swappable hard
drives (3.0 Gbps and 6.0 Gbps)
Up to twenty four 2.5-inch SAS hot-swappable hard
drives (3.0 Gbps and 6.0 Gbps)
• One or two hot-swappable modules
with temperature sensors
• 2 GB of cache per controller
Four 1 GB iSCSI IN connectors to connect hosts
One SAS OUT port for expansion to an additional
PowerVault MD1200 series enclosure.
NOTE:
SAS connectors are SFF-8088 compliant.
One 6-pin mini-DIN connector
NOTE:
For technical support use only.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3220i

Table of Contents