Others; Gas Leak Test; Test Operation; Auto Restart Setting - Toshiba RAS-10SK-E x2 Service Manual

8-6. Others

8-6-1. Gas Leak Test

Electric parts
cover
Service cap
connection
• Check the flare nut connections, valve stem cap
connections and service cap connections for gas
leak with a leak detector or soap water.

8-6-2. Test Operation

To switch the TEST RUN (COOL) mode, press TEM-
PORARY button for 10 sec. (The beeper will make a
short beep.)
CAUTION
• Carry out test operations on one indoor unit at
a time.
Flare nut connections
(Indoor unit)
B
A
B
A
Flare nut connections
(Outdoor unit)
Valve stem cap connection
Fig. 8-6-1
TEMPORARY
button
TEMPORARY
Fig. 8-6-2

8-6-3. Auto Restart Setting

This product is designed so that, after a power failure,
it can restart automatically in the same operating mode
as before the power failure.
Information
The product was shipped with Auto Restart func-
tion in the off position. Turn it on as required.
<How to set the Auto Restart>
• Press and hold down the TEMPORARY button for
about 3 seconds. After 3 seconds, the electronic
beeper makes three short beeps to tell you the Auto
Restart has been selected.
• To cancel the Auto Restart, follow the steps de-
scribed in the section Auto Restart Function of the
Owner's Manual.
– 32 –