Using The Usb Cable - Sony Ericsson C902 Cyber-shot User Manual

C902_UG_2_Generic.book Page 50 Monday, March 3, 2008 1:17 PM
3 Select
4 Select
This is only possible with devices that
require access to a secure service.
To pair the phone with a Bluetooth
handsfree for the first time
1 From standby select
> the Connectivity
Handsfree.
2 Scroll to a device and select Yes.
3 Enter a passcode, if required.
To pair the phone with more than one
Bluetooth handsfree
1 From standby select
> the Connectivity
Handsfree
handsfree.
2 Select a device from the list.
3 Enter a passcode, if required.
Power saving
You can save battery power with the
Power save function. You can only
connect with one Bluetooth device
at a time when using Power save.
You must turn this function off if you
want to connect with more than one
Bluetooth device at the same time.
50 Connectivity
P P reflighted by Preflighted by reflighted by
Options > Allow connection.
Always ask or Always
Menu >
tab > Bluetooth
Menu >
tab > Bluetooth
> My handsfree > New
( ( ( ) ) )
To turn powersave on
allow. • From standby select
> the
Powersave
Transferring sound to and from
a Bluetooth handsfree
You can transfer the sound to and
Settings
from a Bluetooth handsfree using
>
a phone key or the handsfree key.
To transfer sound
1 From standby select
> the
Handsfree
2 Select an option.
Settings
sound to the phone.
>
transfers sound to the handsfree.
To transfer sound during a call
1 During a call, select Sound.
2 Select from the list.

Using the USB cable

You can connect your phone to a
computer with the USB cable to transfer
files, synchronize and use your phone
as a modem. For more information
go to the Getting started section at
www.sonyericsson.com/support.
Menu
Connectivity tab > Bluetooth
> On.
Menu
Connectivity tab > Bluetooth
> Incoming call.
In phone transfers
In handsfree
> Settings
>
> Settings
>