Fuel Shut Off Valve; Lubrication; Chassis: Locations; Service Intervals - Dixon ZTR 4000 series Operator's Manual

CARE AND MAINTENANCE - 4000 SERIES MODELS

FUEL SHUT OFF VALVE:

(The fuel shut off valve is not required on Models ZTR 4423 and ZTR 4424.)
The fuel shut off valve is located at the bottom rear of the fuel tank.
Always turn the valve to the "OFF" position when the mower is stored or not in use.

LUBRICATION:

CHASSIS: LOCATIONS:

SERVICE INTERVALS:

RECOMMENDED GREASE:
Page 26
Model ZTR 4421 (only)
Number of grease zerks used: (4)
(1) each front wheel caster and each front wheel hub.
Every 50 hours of operation
Name brand wheel bearing or multi -purpose grease
Lubri cate each front wheel to allow even distribution of grease
within the wheel, rotate or spin each front wheel after (3) pumps of
the grease gun. Repeat process until the appearance of grease is
noted completely around each caster axle.