Table of Contents
Advertisement
16
EN
B.E.S.T. Picture
System
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
RECORD
OSD (
)
6
q
2
3
5
6
8
9
0
TV PROG.
PLAY
OK
RECORDING (cont.)
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting is "ON".
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The recorder power comes on automatically.
ACCESS MODE SELECT
SCREEN
2
Press OSD(
) and the Language screen appears. (To
change the language,
control.
CONFIRM B.E.S.T. STATUS
3
The default setting is
"ON". If this is the case,
go to step 4. If not, press
TV PROG. ∞ to place the
pointer next to "B.E.S.T.",
then press OK to set to
"ON".
CLOSE MODE SELECT
SCREEN
4
Press OSD (
).
START RECORDING
5
Press and hold RECORD and PLAY on the remote, or
press RECORD on the recorder.
The recorder spends approximately 7 seconds assessing
the condition of the tape, then begins recording.
"B.E.S.T." appears on screen and blinks when
adjustment is complete.
pg. 5) Press OK on the remote
O.S.D.
: ON
B.E.S.T.
: ON
[TV PROG 5 ∞] =
:ON/OFF
[OSD] :EXIT
Advertisement
Table of Contents
