Sony SAL35F14G Service Manual page 70

4-7-3. Focus Brush Pattern Check(Focus Brush Pattern)
Equipment
• Personal Computer
• Finished Inspection JIG
• Lens Adjustment Program (ActuatorChecker.exe)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2) Start up of "ActuatorChecker.exe".
[Set up]
3) Click
2. Checking Method
[Focus Pattern]
1) Click the
2) The Serial window appears. Input the lens serial number.
Note:
When
item.
Fig.4-7-16
3) The message "Move FOCUS to Near position. Then push [ENTER]." is displayed on the pop-up window.
Set the focus to the near position and press down the ENTER key.
SAL35F14G (1.4/35G) (35mm F1.4G)
, and perform the initial setting. (Refer to Section 4-1-4.)
.
Fig.4-7-15
[OK]
is clicked without inputting the serial number, the date executed is displayed on the completion window of each
Fig.4-7-17
4-31