Superimpose - JVC HR-J433U Instructions Manual

18
1
4
7
MENU
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds, leaving the counter information,
and RECORD/PAUSE if in the Record Pause mode, on
the screen. (No indication during still and search.)
2
Press OSD again to clear the display.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
Tape position indicator
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
PLAYBACK AND RECORDING FEATURES (cont.)
2 2
q 5/8 6
OSD
2 3
5 6
8 9
0
CH
OK
SHUTTLE PLUS
CH 125
THU 12:00 AM
seconds.
+
B
Clock time
COUNT

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by
pressing CH5∞ or SHUTTLE PLUS 5 ∞, then press OK.
ACCESS SUPERIMPOSE
SCREEN
3
Place the arrow next to
"SUPERIMPOSE" by
pressing CH5∞ or
SHUTTLE PLUS 5 ∞, then
press OK.
SELECT MODE
4
Place the arrow next to
"ON" or "OFF" by pressing
CH5∞ or SHUTTLE
PLUS 5 ∞.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
Operation mode
When the operation mode is changed,
RECORD
PAUSE
the new mode is displayed — RECORD
] SP
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
+ +
E
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
INDEX-1
MEMORY OFF
Tape speed indicator
–1:23:45
INDEX indication
Counter reading
Counter memory on/off
FUNCTION
AUTO TIMER
=SUPERIMPOSE
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
SUPERIMPOSE
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END