Memorex RX 1 Smart User Manual page 33

Lcd battery charger with usb output
Table of Contents

Advertisement

Available languages

Available languages

GB Manual, operating and safety instructions
Congratulations on the purchase of this quality battery charger
MEMOREX RX 1 Smart. This charger offers more features and
advantages than a traditional charging unit. Your investment will be
largely compensated by the extended life time and better performances
of your rechargeable batteries.
IMPORTANT: please read this manual carefully prior to using this charg-
er. It contains important operating and safety instructions. We also ad-
vise you to save this manual.
Important operating instructions for batteries and charger
New rechargeable batteries and batteries which have not been used for
more than a week need to be fully charged before use. The Memorex NiMH
Ready batteries are precharged before leaving the factory. If possible,
please fully charge them with the RX 1 Smart immediately after purchase.
New batteries which have been stocked for a while after production, can
be reconditioned using the REFRESH function. It will restore optimum ca-
pacity.
Rechargeable batteries will reach their full capacity after about 6 charge
and discharge cycles.
Charging NiMH batteries regularly, at least every 3 to 6 months, will extend
their life time. This applies to the Memorex 'Ready to use' batteries as well
although their low self-discharge rate.
It is important to follow the battery manufacturer's instructions regard-
ing the max. charging current. When quick charge or discharge is not
required, we recommend a default charging current of 200mA and dis-
charge current of 100mA to extend the overall lifespan of your batteries.
The four independent charging channels and circuitry of the RX 1 Smart
permit simultaneous charging of cells with different capacity or size (AA
and AAA).
Do not mix different battery brands, technologies or capacities in an ap-
pliance.
If your electrical appliance is not in use for an extended period, the batteries
should be removed.
The temperature for storage of batteries is between -10°C and 35°C
(14°F and 95°F).
The ambient temperature for charging is between 16°C and 30°C
(61°F and 86°F).
33
GB

Advertisement

Table of Contents
loading

Table of Contents