Inserting Roll Paper - Pidion BIP-100 Series Manual

II. Learning basic installation methods
4

Inserting roll paper

As seen in the figures below, replace roll paper of the terminal appropriately.
1 Press the Printer open/close button to hold up
and open the printer cover.
2 Insert roll paper into the groove.
(If you completely push the cover backward,
the roll paper may be caught. Given this,
insert the paper with the cover softly pulled
forward.)
3 Softly pull out the starting point of the roll
paper from the terminal.
4 Press and close the printer cover.
• To prevent damage, you need to use dedicated roll paper
(57(Width)×50(Diameter)×12(Paper bobbin length)mm) complying with the
standard suitable for the printer.
• In replacing roll paper, you need to cut the power of the terminal.

BIP-100 Manual