Advertisement
9. When your ready to install, note that the steering shafts are installed on the motor
and marked. The shafts need to go back onto the motor the way they came off.
10. Remove the upper shaft from the motor. Install it on the steering column shaft and
install the pinch bolt loosely.
11. Remove the lower shaft from the motor and install it on the rack and pinion. Note
this joint has a large tooth space and needs to line up only one way on the rack.
Install the 10mm bolt nut and lockwasher and leave loose.
Page 5
NOTE: PINK COLOR
BANDS FACE VEHICLE
SPLINES AND WHITE
FACE MOTOR SPLINES.
655920
Advertisement
