Full refund will NOT be granted to any kits that are
damaged, scratched, or altered in any fashion.
Due to minor variations in vehicle frames, we recommend that you
leave all the U-Joint pinch bolts loose until the motor is mounted.
Then rock the steering wheel back and forth to allow the U-Joints to
align themselves. Complete the installation by tightening these bolts.
KIT CONTENTS:
upper shaft
545180
electrical packet
620900
TOOLS NEEDED TO COMPLETE INSTALLATION:
• 3/8" Electric Drill
• 3/8" Drill Bit
• ½ " Drill Bit
• Soldering Iron & Solder
• Open End Wrenches: 10mm, 13mm & 17mm
• 3/8" Drive Socket Wrench and 6" extension
• Sockets: 15/16", 3/8", 8mm, 10mm, 13mm & 17mm
• Wire Stripper/Cutters
• Hammer
• 50 Ft Lb Adjustable Torque Wrench
• Scribe or Marking Tool
• Heat Gun
Page 2
INSTALLATION TIPS:
bracket
hardware packet
621050
motor
module
lower shaft
545170
wiring harness
544060
655920