Epson PowerLite D6150 Installation Handbook page 2

Epson PowerLite D6150 /
D6155W / D6250
5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
6. Lift up the lamp handle and gently pull the lamp out of the projector.
Note:
regulations regarding disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right
way. Press the handle down.
Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
The lamp(s) in this product contain mercury. Please consult your state and local
INSTALLATION HANDBOOK
Maintenance
2