High-Speed Search; Index Search; Manual Tracking - JVC HR-J3006UM Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-J3006UM:
Table of Contents

Advertisement

Available languages

Available languages

••
REW
3

High-Speed Search

ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW . When released, normal playback resumes.
REW
1
1
2
3
2
4
5
6
7
8
9
0
4
CH
••
FF
PUSH JOG

Index Search

Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press PUSH JOG ™ or
£ ( or ).
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
PUSH JOG ™ or £ (
correct number is displayed on screen (only if SUPERIM-
POSE is set to "ON"
automatically when the desired recording is located.
If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.

Manual Tracking

Once playback begins, the VCR's automatic tracking function is
engaged. If tracking noise appears in the picture, you can
override this and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1
During playback, press the CH5 and ∞ buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUAL
TRACKING
2
Press CH 5 or ∞ on the VCR's front panel or remote.
Press briefly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3
Press the CH 5 and ∞ buttons on the VCR's front panel
simultaneously.
When automatic tracking is re-engaged, Video
Calibration is automatically activated.
NOTES:
To obtain a noiseless still picture it may be necessary to adjust
tracking in slow playback and then engage Pause.
Manual tracking is possible during hands-free slow-motion.
During hands-free slow-motion playback, simply press CH 5
or ∞ on the VCR's front panel or remote to adjust tracking.
17
EN
or
) repeatedly until the
pg. 20). Playback begins

Advertisement

Chapters

Table of Contents
loading

Table of Contents