Table of Contents
Advertisement
42-5075.fm Page 19 Thursday, August 12, 1999 1:03 PM
TROUBLESHOOTING
If you have problems operating your CD player, check this chart. If these sugges-
tions do not solve the problem, contact your local RadioShack store for assistance.
Problem
The CD player does not
work.
A CD is loaded, but the
CD player does not
start.
Sound from a CD skips.
Possible Cause
is
OFF/RESUME/HOLD
set to
.
HOLD
No power.
The CD is loaded
upside-down.
The CD is dirty or
defective.
The CD is dirty or
defective.
Vibration is excessive.
Moisture has con-
densed on the pickup
lens.
Solution
Set
OFF/RESUME/HOLD
to
.
OFF
Be sure the batteries are
not weak.
Make sure an AC adapter
or the DC adapter is
properly connected.
If you are using a DC
adapter to power the CD
player, check the adapt-
er's fuse. See "Replacing
the DC Adapter's Fuse"
on Page 21.
Reload the CD, label side
up.
Clean the CD and reload
it, or try a different CD.
See "Replacing the DC
Adapter's Fuse" on
Page 21.
Clean the CD and reload
it, or try a different CD.
See "Replacing the DC
Adapter's Fuse" on
Page 21.
Set
to
.
DAS OUT/IN
IN
Place the CD player in a
different location.
Wait 1 hour for the mois-
ture to evaporate.
19
- Quick Links:
- Playing a CD
Hide quick links:
Advertisement
Table of Contents
