Speci Cations; Inputs; Outputs; Audio - Aphex Compellor 320A Owner's Manual

320A
Compellor

5.1 INPUTS

Connector:
Type:
Impedance:
Operating Level:
Max input level:
CMRR:

5.2 OUTPUTS

Connector:
Type:
Impedance:
Max level out (bal):
Max level out (unbal):

5.3 AUDIO

Frequency response:
Hum & noise:
No gain reduction:
10dB gain reduction:
Crosstalk @ 20KHz:
Dynamic THD
Static THD:
IMD, max output:

5.4 SYSTEM FUNCTIONS

5.5 THRESHOLD

Compressor:
Leveler:
Limiter:
3 pin XLR female
transformerless, servo balanced, RFI fIltered
22K-ohms balanced, 11K-ohms unbalanced
user selectable +4dBu or -10dBV
+27dBu(ref = +8), +25dBu(ref = +4), +10.8dBV(ref = -10)
>90dB/100Hz, >70dB, 1KHz, >50dB, 20KHz
3 pin XLR male
electronic servo balanced (unbalanced without 6dB loss)
65 ohms bal or unbal (nominal load 600 ohms or greater)
+25dBu(ref = +4), +10.8dBV(ref = -10)
+20dBu(ref = +4), +10.8dBV(ref = -10)
+/- 1dB 10Hz to 65KHz
measured for a 1KHz tone at unity gain
-67dBu(ref = +4), -86dBV(ref = -10)
-74dBu(ref = +4), -89dBV(ref = -10)
-65dBu(ref = +4), -78dBV(ref = -10)
typically .05% for 1KHz at 20dB gain reduction
.025% at maximum output level
.13%(ref = +4), .4%(ref = -10)
Compression
Frequency Discriminate Leveling
Peak Limiter
Dynamic Verification Gate (DVG)
Dynamic Recovery Computer (DRC)
Silence Gate
Stereo Enhance
30dB below nominal level
30dB below nominal level
14dB above nominal level
Page 14

5. Speci cations