Sharp 802 User Manual page 43

Voice Call/Video Call Functions
Note
• The conference call service may not be available on all networks. Contact your network
operator for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on hold, select "Private".
• To end the call with all participants, select "End Active Call(s)" or "End Held Call(s)".
• To reject adding more participants to the current party, press [Options] and select
"Reject", or you can send the busy tone by selecting "Busy".
To Add New Participants to the Conference Call
1.
Press [Options] and select "Dial New Number".
Enter the number you wish to include in the conference call and press D to dial.
2.
3.
Press [Options] and select "Multi Party".
4.
Select "Conference All" to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that you wish to disconnect from the
conference call.
2.
Press [Options] and select "End Active Call(s)" or "End Held Call(s)".
42