0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force in to implement the introduction of green products. The task force will ensure that we follow the standard...
? Replace with 3rd party products if needed. the RMA number apply process. ? If RMA goods can not be repaired, NEXCOM will return it to the cus- tomer without any charge. ? Customers can send back the faulty products with or without acces- sories (manuals, cable, etc.) and any components from the card, such as...
Technical Support and Assistance Conventions Used in this Manual Warning: Information about certain situations, which if not 1. For the most updated information of NEXCOM products, visit NEX- observed, can cause personal injury. This will prevent injury to COM’s website at www.nexcom.com.
Page 12
Preface ackage ontents Before continuing, verify that the NISE 2100/2110 Series package that you received is complete. Your package should have all the items listed in the follow- ing table. Item Part Number Description 50311F0110X00 (H)FLAT HEAD SCREW LONG FEI:F3x5ISO+NYLOK NIGP 602DCD0337X00 (N)NISE2100 CD DRIVER VER:2.0...
• Supports up to 2GB DDR3 800 SDRAM memory module, unbuffered, Storage non-ECC • 1 x 2.5” SATA HDD drive bay (NISE 2100/2100A) 1 x 2.5” SATA HDD drive bay or optional SATA DOM module - horizon- Expansion tal type (NISE 2110/2110A) • NISE 2100/2100A...
This chapter describes the jumpers and connectors on the motherboard. tronic components. Humid environment tend to have less static electric- Note that the following procedures are generic for all NISE 2100/2110 ity than dry environments. A grounding strap is warranted whenever series.
Locations of the Jumpers and Connectors NISB 2100 The figure below is the top view of the NISB 2100 main board which is the main board used in the NISE 2100 Series system. It shows the locations of the jumpers and connectors.
BIOS is updated in the future. options, and second, to make settings appropriate for the way you use the computer. To check for the latest updates and revisions, visit the NEXCOM Web site at www.nexcom.com.tw. When to Configure the BIOS...
GPIO Programming Sample Code design. This appendix provides definitions and its default setting for the #define GPIO_PORT 0x284 ten GPI/O pins in the NISE 2100/2110 Series. The pin definition is shown in #define GPO3 (0x01 << 4) the following table: #define GPO5 (0x01 <<...
Need help?
Do you have a question about the NISE 2100 and is the answer not in the manual?
Questions and answers