Table of Contents
Advertisement
DV-545, DV-444-S, DV-444-K
Rear Panel (DV-444-S and DV-444-K)
1
CONTROL
VIDEO OUT
S
∞
IN
5
6
1
CONTROL IN jack
Use to connect this player to another component bearing the
Pioneer Î mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component that
the player is connect to.
2
AV CONNECTOR (RGB)-TV jack
Use a 21-pin SCART cable to connect to a TV or monitor
compatible with this type of connection. Both audio and video
signals are output from the AV CONNECTOR (RGB)-TV jack.
3
AUDIO OUT jacks
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both
connections.
4
AC IN power cord connection terminal
Use to connect the power cord to the wall outlet.
98
2
3
AV CONNECTOR (RGB)-TV
AUDIO OUT
R
L
AV CONNECTOR 2
DIGITAL OUT
OPTICAL COAXIAL
7
8
5
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
6
VIDEO OUT jack
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
7
DIGITAL OUT OPTICAL jack
Use to output the digital audio signal recorded on discs. You
can output the digital signal via the optical output jack to an AV
amplifier or receiver.
8
DIGITAL OUT COAXIAL jack
Use to output the digital audio signal recorded on discs. You
can output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
4
AC IN
Hide quick links:
Advertisement
Table of Contents
