Panel Facilities And Specifications - Pioneer DV-545 Service Manual

DV-545, DV-444-S, DV-444-K

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
Front Panel (DV-545)
1
STANDBY/ON
5
1
STANDBY/ON button
Press to switch the player on or to put in standby.
2
Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
3
Remote sensor
Point the remote control toward the remote sensor to operate
the player.
4
Display window
Displays system information.
5
This mark, indicating compatibility with DVD-RW discs recorded
on a DVD recorder.
6
LEGATO PRO button and indicator
Each press switches between [Off], [Standard], [Effect 1],
[Effect 2] and [Effect 3]. The indicator lights when on any of
the Effect settings. You can also switch the Legato Pro mode
from the Setup menu.
94
2
4 1 ¡ ¢
LEGATO
0
PRO
6 7 8 9
3
7 8 Î
3
0 - =
7
0 (open/close) button
Press to open and close the disc tray.
8
4 1 (reverse) button
Press to go back to previous chapters/tracks. Press and hold to
perform reverse playback scanning.
9
¡ ¢ (forward) button
Press to advance to chapters/tracks. Press and hold to perform
fast-forward scanning.
0
7 (stop) button
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it
stopped. Pressing twice causes the disc to return to the
beginning of the disc if playback starts again.
-
8 (pause) button
Press during playback to pause. Press again to resume
playback.
=
3 (play) button
Press to start or resume playback.
4
DVD PLA YER